LO stability: | +/- 2.5 ppm PLL stabilized over temperature |
Ethernet I/O Specifications | |
Data Input/Output: |
|
Connector: | Shielded |
Signaling Format: | IEEE802.3i (10baseT) and IEEE802.3u (100baseT) compliant |
Filtering: | PPPoE per RFC 2516 (SU only) |
Fully supports | |
Bridging Frame Size: | 60 to 1600 bytes |
Mngmt Frames: | 60 to 1472 bytes. (includes PING, TELNET, TFTP, HTTP) |
Protection: | |
| compliance with: |
| |
| |
| |
Power Specifications |
|
Input Voltage: | Input voltage range at unit is 10.5 VDC to 24 VDC max |
Power is supplied via unused pins of the
Current Cons.: | 500 mA in transmit and receive modes at max power using 20 V |
| standard adapter (10 W) and 10 ft cable from |
Protection: | 28 volt Transient Voltage Suppression (TVS) diode on power input |
| Note: Voltages above 28 volts will cause damage to unit. |
Mechanical and Environmental Specifications | |
General |
|
Material: | High temp polycarbonate radome and diecast metal enclosure |
Size: | 12.5” x 8” x 2.75” including mounting studs |
Weight: | 4 lb |
Mounting: | 2 |
Connectors/Indicators |
|
RF Output: | Integral internal patch antenna per Part 15C, 15.203 |
| External |
FCC Compliance: The transceiver complies with the following:
FCC Part 15.247
FCC Part 15.207(a)
Environmental |
|
|
Operating Temp: |
| |
Storage: |
| |
Humidity: | 100 % when sealed properly |
|
NEMA Rating: NEMA 4 |
|
|
Shock: | Sustain 3 axis drop from 5 feet |
|
Standard External Power Supply |
| |
20 Volt DC Power adapter and |
| |
|
| |
Trango Broadband Wireless — User Manual M2400S Rev. A | Page 45 |