Transition Networks SISTM10XX-162-LR Switch Setting, Apply, Port Control interface

Port Control

Change the port status

•Select the port by scroll the Port column

•State: Disable or enable control of this port

•Negotiation: Set auto negotiation mode is Auto, Nway (specify the speed/duplex on this port and enable auto-negotiation), or Force

•Speed: Set the speed of the port

•Duplex: Set full-duplex or half-duplex mode of the port

•Flow control: Set flow control function is Symmetric or Asymmetric in Full Duplex mode. The default value is Disable

•And then, click

Apply

button to apply all configuration

•When user select the port, user can see port current configure shows in below column

Port Control interface

Switch Setting

Assigning the system name, location and view the system information

•System Name: Assign the name of switch. The maximum length is 64 bytes

•System Description: Display the description of switch. Read only cannot be modified

•System Location: Assign the switch physical location. The maximum length is 64 bytes

•System Contact: Enter the name of contact person or organization

•Firmware Version: Display the switch’s firmware version

•Kernel Version: Display the kernel software version

19