Transition Networks SISTM10XX-162-LR installation manual Ring Interface

The system also supports the coupling ring that can connect 2 or more X-Ring group for the redundant backup function and dual homing function that prevent connection lose between X-Ring group and upper level/core switch.

•Enable X-Ring: To enable the X-Ring function. Marking the check box to enable the X-Ring function.

•1st & 2nd Working Ports: Assign two ports as the member ports. One port will be working port and one port will be the backup port. The system will automatically decide which port is working port and which port is backup port.

•Enable Coupling Ring: To enable the coupling ring function. Marking the check box to enable the coupling ring function.

•Coupling port: Assign the member port.

•Control port: Set the switch as the master switch in the coupling ring.

•Enable Dual Homing: Set up one of port on the switch to be the Dual Homing port. In an X-Ring group, maximum Dual Homing port is one. Dual Homing only work when the X-Ring function enable.

•And then, click

Apply

to apply the configuration.

X-Ring Interface

[NOTE]

1.When the X-Ring function enable, user must disable the RSTP. The X-Ring function and RSTP function cannot exist at the same time.

2.Remember to execute the “Save Configuration” action, otherwise the new configuration will lose when switch power off.

36