Transition Networks SISTM10XX-162-LR installation manual Led, Vlan

	4 types of packet filter rule with different packet combination:
	￿ All of packet
Packet filter	￿ Broadcast/ multicast/ unknown unicast packet
	￿ Broadcast/ multicast packet
	￿ Broadcast packet only
MAC address	2K MAC address table
Memory Buffer	1Mbits
	Per port: Link/Activity (Green), Full duplex/Collision (Yellow)
LED	Per unit: Power (Green), Power 1 (Green), Power 2 (Green),
	Fault (Yellow), Master (Green)
	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
Network Cable	EIA/TIA-568 100-ohm (100m)
	100Base-TX: 2-pair UTP/STP Cat. 5 cable
	EIA/TIA-568 100-ohm (100m)

￿ST (Multi-mode): 50/125um or 62.5/125um

￿ST (Single mode): 9/125um

Optical cable

￿Available distance: 2KM (Multi-mode) / 30KM (single-mode)

￿Wavelength: 1310nm (multi-mode/ single mode)

Back-plane	1.6Gbps
Packet throughput	1.19Mpps @64bytes
ability
	12 ~48 VDC
Power Supply	Redundant power with polarity reverse protects function and
	connective removable terminal block for master and slave power.
Power consumption	7.68 Watts
	2 ports for X-Ring to provide redundant backup feature and the
X-Ring	recovery time below 300ms and start by Web interface
	management. The ring port can be defined by Web interface.
	Port based VLAN
VLAN	IEEE802.1Q Tag VLAN.
	Both of port based and Tag based VLAN group up to 64 VLANs.
Class of service	IEEE802.1p class of service
	Per port provides 4 priority queues.
Quality of service	The quality of service determined by port, Tag and Ipv4 Type of
	service.

50