VII. OPERATING THE BLAST CHILL CONTROL - SYSPAR
VII. i - ACCESSING SYS PAR SETTING LEVEL:
SYS PAR represents the supervisor level of access to the SmartChill® controller, allowing
To enter the SYSPAR access level please follow the below procedure.
STEP ONE: From the MAIN MENU, select MORE by pressing the button to the right of where this is shown on the display. The menu shown will then change to display additional menu options.
STEP TWO: Press the button to the right of where SETUP is shown on the display. Note when you first enter SETUP, only Preset Supervisor is available (as delivered, only the factory preset supervisor’s PIN access or ID is
Press the buttons to the left and right of where PASSWORD is shown on the display to scroll to the factory preset PIN of “57.” Press the button to the right of where ENTER appears on the control to enter this PIN number. The SETUP display menu is displayed.
NOTE: If users have already been setup, select the supervisor’s name using the UP or DOWN keys. On the next line, use the UP or DOWN keys to enter their Password (or Personal Identification Number). Press the button to the right of where ENTER appears on the control to enter this selection. The SETUP display menu is displayed.
STEP THREE: From the SETUP display menu , select the button to the right of where SYS PAR is shown on the display. Refer to the diagram on page 21 in order to access the various Sys Par settings
MAIN MENU | AIR 35°F | ||
BY TEMP | BY PROD | ||
BY TIME |
|
|
|
08:05:01 |
|
|
|
|
| MORE | |
MAIN MENU | 08:06:01 | ||
HOLD PROD |
| ||
DEFROST |
|
|
|
| SETUP | ||
BACK |
|
|
|
SELECT SUPERVISOR: ↓PRESET SUPERVISOR↑ ↓PASSWORD (PIN): 00↑
CANCEL ENTER
SELECT SUPERVISOR: ↓PRESET SUPERVISOR↑ ↓PASSWORD (PIN): 57↑
CANCEL ENTER
MAIN MENU | 08:06:01 |
HOLD PROD | |
DEFROST | SETUP |
BACK |
|
SETUP | 09:04:11 |
PRODUCTS | SYS PAR |
USERS |
|
MAIN MENU |
|
SYS PAR: SET CLOCK | |
ITEM: | MONTH |
VALUE:APRIL | |
CANCEL | ENTER |
SYS PAR Menu Display
