Functions, Function Explanation | Trek 6i, 8i guide

Functions

Table 1- Function abbreviations, names, and explanations

	Function	Explanation

	CLOCK	Time of day
	CLK	Displays in hours and minutes, or stopwatch	CLK
	TME	showing seconds.	CLK
	TME	showing seconds.
		12-hour with AM/PM or 24-hour format
		Highest reading: 23:59 (clock)
		or 23:59:59 (stopwatch)

	ODOMETER	Distance ridden
	ODO	Displays in miles or kilometers.
		TRP-Trip (since last Restart)	MH
		TTL- Total since last Reset
		Highest reading: 99,999	ODO
			ODO

	PACER	Always displays
	(8i only)	Indicates whether current speed is faster or slower
		than average speed
		Displayed by arrow pointing up (faster) or down
		(slower).

MH

Functions

Image 4

Trek 6i, 8i owner manual Functions, Function Explanation

Contents

Trek Incite 6i 920 Contents Safety and general guidelines Watch the road when riding Functions Function Explanation Wheel Installation Mount To install the computer on handlebar Placing the computer on the handlebar To install the computer on the stem Make sure the com- puter cannot be bounced off To install the wheel magnet Placing the magnet Attaching the computer wire To attach the computer wire To install the sensor Attaching the sensor Tighten the nylon ties and trim the excess length Figure Easy setup ReSet Using the buttons Set To set the computer To set 6i wheel size To set 8i wheel size Select wheel screen Cycle Mode to TRP To select the wheel for use To set Clock Clock screen ReStart- Getting ready to ride To ReStart set the Trip data to zero Changing mode Using the computer in wet weatherAdditional information Removing the computer from the computer base Troubleshooting Replacing the battery To replace the battery Be careful to avoid losing the rubber O-ring seal Setting custom wheel size Selecting the custom value 4-digit number Push Set To measure rollout for wheel size Measuring rollout for wheel size This warranty covers Limited WarrantyThis warranty does not cover