Trek Incite 6i, 920 | Trek 8i instruction

TREK INCITE 6i and 8i

Bicycle Computer Owner’s Manual

This manual explains the instal- lation and use of the Trek Incite 6i and Incite 8i bicycle computer. Please read this manual carefully and save it for future reference.

If you do not understand the
information in this manual, or		MH
you have a question about your		MH
Incite 6i computer that this
manual does not cover, consult
your Trek dealer. If you have a
question or problem that your
Trek dealer can’t handle, contact
us at:	ODO
Trek Bicycle Corporation
Attn: Customer Service
801 W. Madison Street
Waterloo, Wisconsin 53594
http://www. trekbikes.com	© Copyright Trek Bicycle Corporation
(920) 478-4670		2006 All rights reserved

Image 1

Trek 8i owner manual Trek Incite 6i, 920

Contents

920 Trek Incite 6i Contents Watch the road when riding Safety and general guidelines Function Explanation Functions Wheel Mount Installation Placing the computer on the handlebar To install the computer on handlebar Make sure the com- puter cannot be bounced off To install the computer on the stem Placing the magnet To install the wheel magnet To attach the computer wire Attaching the computer wire Attaching the sensor To install the sensor Tighten the nylon ties and trim the excess length Figure Easy setup ReSet Set Using the buttons To set 6i wheel size To set the computer Select wheel screen To set 8i wheel size To select the wheel for use Cycle Mode to TRP Clock screen To set Clock To ReStart set the Trip data to zero ReStart- Getting ready to ride Using the computer in wet weather Changing modeAdditional information Removing the computer from the computer base Troubleshooting To replace the battery Replacing the battery Be careful to avoid losing the rubber O-ring seal Selecting the custom value 4-digit number Setting custom wheel size Push Set Measuring rollout for wheel size To measure rollout for wheel size This warranty covers Limited WarrantyThis warranty does not cover