Brother 1650 manual Error Message List, Block Limit

Error Message List

Error Message		Cause			Solution
	• This message appears if you			•	Cancel the Numbering
	try to use the Numbering				function.
1 BLOCK LIMIT!	function when multiple			• Limit the number of text
	blocks of text have been				blocks to 1.
	entered with the PANEL
	Label Type mode selected.
	• This message appears if 7			• Limit the number of lines in
	lines have already been				a text block to 7.
	entered in a text block when
7 LINE LIMIT!	you press n.
	• This message appears if you			• Adjust the number of lines
	delete		, causing the		so that the block will not
	number of lines in a block to				have more than 7 lines.
	exceed the 7-line limit.
	• This message appears if 50			• Limit the number of text
50 LINE LIMIT	text blocks have already				blocks to 50.
REACHED!	been entered when you press
	g, then n.
	• This message appears if no			• Type in some text before
BUFFER EMPTY!	text has been typed in when				trying to perform any of
	you try to print or Preview				these operations.
	function.
	• This message appears if you try			•	Delete some existing text
	to add a character, a space, a				before trying to add any
BUFFER FULL!	new line, a new block, a				more.
	symbol, an accented character
	or a bar code after the
	maximum number of characters
	has already been entered.
CASSETTE	• This message appears if the			• Change the tape cassette
	tape cassette was changed				back again.
CHANGED!	while the P-touch paused for
	the tape to be cut.
	• This message appears if a			• Replace the batteries with
	combination of new and				six new AA batteries of the
	used batteries, a combination				same type.
CHECK	of batteries of different types			•	If rechargeable batteries are
	(alkaline, Ni-Cd and Ni-				installed, recharge all
BATTERIES!
	MH), manufacturers or				batteries.
	models, or a combination of
	recharged and uncharged
	batteries have been installed.

Appendix

59