7
Getting Started
Strong Adhesive Tape
☞For textured, rough, or slippery surface, we recommend using Str ong Adhesive Tape.

☞Although the instruction sheet included with the Strong Adhesive Tape

cassette recommends cutting the tape with scissors, the tape cutter that

this P-touch is equipped with is able to cut Strong Adhesive Tape.

Flexible ID Tape
☞For applications that require more flexible labels, such as around sharp bends and
cylindrical objects, we recommend using Flexible ID Tape.
☞Labels made with Flexible ID Tape are not designed for use as electric al insulation.
☞When wrapping labels around cylindrical objects, the diameter of the object should be at
least 1/8" (3 mm), otherwise the label should be wrapped as a flag an d the FLAG Label
Type mode should be used. In addition, the overlapping en ds of the label or the label flag
should be at least 3/16" (5 mm).
☞The label may peel off cylindrical objects if the object is bent after the label is affixed.
Diameter > 3 mm
Diameter > 3 mm
Overlap > 5 mm
Overlap > 5 mm
Flag > 5 mm