2 Connect the P-touch to the computer

USB interface cable

using the enclosed USB interface cable,

 

and then hold down g and press

 

o to turn on the P-touch in

 

Transfer mode. The first “Found New

Hardware Wizard” dialog box appears.

3Select “Install the software automatically (Recommended)”, and then click “Next”. A dialog box

appears, warning that the software has not passed Windows® Logo testing.

4Click “Continue Anyway” to continue with the installation. A “Found New Hardware Wizard” dialog box appears, indicating that the Found New

Hardware Wizard has finished installing the printer driver for the P-touch.

If a “Driver Setup” dialog box appears, indicating that the printer driver has been installed, click “Finish”.

5Click “Finish”. A dialog box appears, indicating that the installation is finished.

6Select “Yes, I want to restart my computer now.” (or “Yes, restart immediately” if the printer driver was installed separately), click “Finish” to restart the computer, and then remove the CD-ROM from the computer.

To uninstall the printer driver, start up the installer on the CD-ROM, click the Driver button in the dialog box that appeared, and then select the desired option and follow the instructions that appear.

P-touch With a

(for PT-1650 only)

Using

Computer

 

 

45

Page 52
Image 52
Brother 1650 manual Then hold down g and press To turn on the P-touch