Brother 1650 manual Check the Number

Error Message		Cause	Solution
	•	This message appears if you	• Select a different Label
		try to change the settings for	Type mode.
CHECK SETTING IN		the Length function or
		Frame function after a Label
LABEL TYPE MODE!
		Type mode with a preset
		label length or frame has
		already been selected.
On 3/4" (18 mm) tape:	•	This message appears if you	• Reduce the number of lines
CHECK THE NUMBER		try to print or use the	or install a wider tape.
OF LINES! 5 MAX		Preview function when the
		number of lines in the text is
On 1/2" (12 mm) tape:		greater than the maximum
CHECK THE NUMBER		possible for the installed
OF LINES! 3 MAX		tape.
On 3/3" (9 mm) and 1/4" (6
mm) tape:
CHECK THE NUMBER
OF LINES! 2 MAX
	•	This message appears if	• Select less than 1000 copies.
		more than 1000 copies were
CHOOSE COPIES		selected with the Print
		Option functions.
LESS THAN 1000!	•	Note the number of copies
		plus the number of
		sequential labels cannot
		exceed 1000.
	•	This message appears if the	• Release the tape cutter
		tape cutter button was	button. If pwas pressed,
		pressed in when p was	press f to feed out any
CUTTER ERROR!		pressed or the tape was	printed tape.
		being fed.
			• If the problem cannot be
			corrected, contact your
			service representative.
IMAGE CHARACTER	•	This message appears if a	• Change the Label Type
		wide user-defined character	mode or use a tall user-
SIZE ERROR!		image is entered when the	defined character image.
(for PT-1650 only)		Vertical Label Type mode
		is selected.
INPUT WHOLE	•	This message appears if the	• Input the correct number of
		required number of digits is not	digits or change the bar code
CODE!
		entered in the bar code data.	protocol.

60