●BLK LEN. (block length): * For the PORT Label Type mode: 0.80" to 8.00" (20 to 200 mm) Default: 1.20" (30 mm)
*For the PANEL Label Type mode: 0.25" to 8.00" (6 to 200 mm) Default: 1.20" (30 mm)
● FRAME: | * For the PORT Label Type mode: |
| ||||
| OFF, 1 |
| , 2 |
| , 3 | , 4 |
|
|
| ||||
| Default: OFF |
|
|
|
| |
*For the PANEL Label Type mode:
| OFF, 1 |
|
| , 2 |
|
|
| , 3 |
|
| , | ||||
| 4 |
|
|
| , 5 |
|
|
| , 6 |
| , |
|
| ||
| 7 |
|
|
| , 8 |
|
|
| , 9 |
|
|
|
| ||
| Default: OFF |
|
|
|
|
|
| ||||||||
● PRINT (print order): | FRONT, REVERSE |
|
|
|
|
|
| ||||||||
| Default: FRONT |
|
|
|
|
|
| ||||||||
☞For these types of labels, we recommend using Strong Adhesive Tape.
☞The PRINT parameter is only available with the PANEL Label Type mode.
☞Using the Numbering function with the PANEL Label Type mode makes it easy to create a single label of multiple blocks containing ascending characters, which can be used, for example, to label patch panels as shown above. Simply type in one block of text, and then use the Numbering function to print several copies of the text block on a single label while automatically increasing certain characters in each block. (For details on the Numbering function, refer to Printing multiple copies with incremental characters on page 32.)
14
