Installation (continued)
Multilevel Installations
Protocol Interface Cascading
Protocol Interface Cascading refers to cascading to a second stage KVM switch (such as the eight port Tripp Lite
With this type of cascade, all of the separate switch OSDs are integrated so that when the
256 computers can be controlled from a single
To set up a Protocol Interface Cascade, refer to the installation diagram below and do the following:
1.Make sure that power to all the devices you will be connecting up has been turned off.
2.Use Cat5e cable to connect any available CPU Port on the First Stage unit (the
Note: The distance between the Second Stage unit and the
3.Use KVM cable sets (as described in the Cables section of the Second Stage unit's User Manual), to connect any available CPU port on the Second Stage unit to the Keyboard, Video, and Mouse ports of the computer you are installing.
4.Plug the Second Stage unit's power adapter into an AC source; plug the power adapter cable into the unit’s Power Socket.
5.Repeat steps 2 - 4 for any other Second Stage units you wish to connect.
6.Turn on the power for the First Stage unit; turn on the Second Stage unit, turn on the power to all the computers.
1
B062-001-PS2
Multiple Modules
B054-001-PS2
Multiple Modules
B007-008
12