Tripp Lite B060-032 owner manual Firmware Upgrade Utility, Introduction, Purpose, Before You Begin

The Firmware Upgrade Utility

Introduction

Purpose

The purpose of the Windows-based Firmware Upgrade Utility (FWUpgrade.exe) is to provide an automated process for make upgrading the KVM switch’s firmware as smooth and painless as possible.

The program comes as part of a Firmware Upgrade Package that is specific for each device.

As new firmware revisions become available, new firmware upgrade packages are posted on our web site:

http://www.tripplite.com

Check the web site regularly to find the latest information and packages.

Before You Begin

To prepare for the firmware upgrade, do the following:

1.From a computer that is not part of your KVM installation go to our Internet support site and choose the model name that relates to your device to get a list of available Firmware Upgrade Packages.

2.Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.

3.Use Cat5e cable to connect the B060-032’s Firmware Upgrade Port to a hub that the computer you used in Step 1 connects to.

Note: On a daisy chained installation, connect the cable to the First Station unit. The chained stations will receive the upgrade via the daisy chain cables.

4.Shut down all of the computers - but not the Stations - on your KVM installation.

5.From your KVM switch console, bring up the OSD and select the F4ADM function.

6.Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to invoke Firmware Upgrade Mode.

31