Beforeinspecting, cleaning or servicing themachine, shut off engine, wait for all moving partsto
come to a complete stop, disconnect spark plug wire and move wire away from spark plug.
Removethe key from thekeyswitch on units so equipped.
Failureto follow theseinstructions can result in serious personal injury or property damage.

MAINTENANCESCHEDULE

PROCEDURE NOTES
Checkmotor oillevel 2,3
C)eanengine 2,7
Checkdrive belt tension 1,4
Checknuts and bolts 1,4
Changemotoroi( 1,4,6
Lubricatetiller 4
Servicefoampre-cleanerairfilter 7
(ifso equipped)
ServicepaperairfUter(if so equipped) 7
Checkgear oillevelin transmission 1,5
Checktines for wear 5
Checkairpressureintires 5
Servicespark p)ug 7
NOTES
1-Atier first 2 hours of break-in operation.
2-Beforeeach use.
3-Every5operatinghours,
4-Every10operatinghours,
5-Every30 operatinghours,
6-More frequently industy or dirty conditions,
7-SeeEngineOwner'sManualforservice
recommendations,
8-Whichevertimeintervaloccursfirst,
TILLERATTACHMENTS
Theattachments listed below areavailable for your tille Contact your authorizeddealer or the factory for current information.
BUMPER-- MODEL0EM-290-254
Thetubular steel bumper helps to protect the enginefrom damage.
HILLER/FURROWER-- MODEL0EM-290-251
Thefurrower bladeattachesto the back of the depth regulator assemblyand is used to create rows, trenchesand ditches upto 8"
deep,depending on soilconditions. Thetwo hillerwings attachtothe sidesof the furrower bladeand are used to make hilled rows
and raisedbedgardens.
ROWMARKER--MODEL0EM-290-257
Therow marker attachesto the hiller/furrowerattachment and is usedto scratch linesin the seedbedfor layingout furrows,
trenches,raised beds, etc. (eliminates the needforstakes, stringand measuring tape). Therow markeris adjustable in length from
28"to 49-3/4", allowing you to vary the width of the marked rows as required.