Assembly
Assembly
Hardware Kit:
1.Safety key
2.5mm
3.5mm hex key/Philips screwdriver
4.3mm hex key
5.2mm hex key
6.8mm x 15mm hex screws (4)
7.8mm x 50mm hex screws (2)
8.6mm x 15mm hex screws (4)
9.handrail clamps (2)
Step 1: Carefully unpack treadmill and check that all hardware is present as shown.
Step 2: Remove motor cover by taking out the six screws with Philips screwdriver.
Step 3: The upper wiring harness is tucked into the bottom of the right pedestal leg. Lay the pedestal on the treadmill as shown on page 6.
5
