Symptom | Probable Cause | Corrective Action | Recommended Tools |
HANDLEBAR BUTTONS DO NOT FUNCTION 600R
“Cruise Control”
“Start” Button
“Shift” Button
“_“ Button
“Select” Button
“+” Button
•Remove
•Check for continuity between pin 7 and pin 1 at 10P7B. Press Cruise control button.
(A)
•No continuity? Perform a continuity check on the appropriate cable.
•Replace cable or if cable good – replace handlebar assembly.
•Check for continuity between pin 7 and pin 2 at 10P7B. Press Start button. See
(A) above.
•Check for continuity between pin 7 and pin 3 at 10P7B. Press Shift button. See
(A) above.
•Check for continuity between pin 7 and pin 4 at 10P7B. Press _ button. See (A) above.
•Check for continuity between pin 7 and pin 5 at 10P7B. Press Select button. See
(A) above.
•Check for continuity between pin 7 and pin 6 at 10P7B. Press + button. See (A) above.
•If all have continuity and problem persists – replace Console
Support Services | Fax: | |
|
|
|
Page 11
