Removal & Replacement | 600R |
Remove Crank Hub Assembly
Tools Required:
Large Crescent Wrench
Rubber Mallet
Flat Blade Screwdriver
Step 1.
Use crescent wrench to remove Large nut on crank.
Step 1. Remove Crank Nut.
Note:
The crank nut has
Step 2.
Remove keyed washer from under nut.
Step 2. Remove Keyed Washer
Step 3.
Use crescent wrench to remove hex nut bearing. Use rubber mallet
to knock out the shaft pulley assembly.
Note:
The Hex nut bearing has left- handed threads. Turn clockwise to loosen.
Step 3. Remove Hex Nut Bearing
Page 96 | Copyright 2001 True Fitness Technology, Inc. |
