Removal & Replacement | 500R |
Remove Front Hub Assembly (continued)
Step 6.
Twist assembly thru frame hub.
Pull assembly until clear of frame.
Note:
Right hand thread.
Step 6. Twist Unit Thru Hub Frame
Step 7.
Use hammer & punch to loosen spanner nut on bearing.
Step 7. Drive spanner nut off to remove bearing
Step 8.
Remove bearing and washer by
Slipping off crank.
Note:
Pulley and crank are a welded assembly (cannot be separated).
Step 8. Remove Bearing & Washer
Copyright 2001 True Fitness Technology, Inc. | Page 67 |
