adjustments other than those described in this guide. Everything else must
be left to someone familiar with the maintenance of electromechanical equipments and authorised under the laws of the country in question to carry out maintenance and repair work.
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD OF TUNTURI
EXERCISING!
Your choice shows that you really want to invest in your well being and condition; it also shows you really value high quality and style. With Tunturi Fitness Equipment, you’ve chosen a high quality, safe and motivating product as your training partner. Whatever your goal in training, we are certain this is the training equipment to get you there. You’ll find information about using your exercise equipment and what makes for efficient training at Tunturi’s website at www.tunturi.com.
ASSEMBLY
Start by unpacking the equipment and check that you have the following parts:
1.Frame
2. Rear support
3. Plastic covers for front support (2 pcs)
4. Front support
5.Pedals (2 pcs)
6. Seat support
7.Seat
8. Handlebar support
9.Handlebar
10. Console
11.Console back cover
12. Assembly kit (contents marked with in the spare part list): keep the assembly tools, as you may need them e.g. for adjusting the equipment.
If necessary, please contact your dealer with the model, equipment serial no. and spare part no. of the missing part. You’ll find a spare part list at the back of this guide. The packaging includes a silicate bag for absorbing moisture during storage and transportation. Please dispose of the bag once you have unpacked the equipment. The directions left, right, front and back are defined as seen from the exercising position.
O W N E R ' S M A N U A L • F 2 0 G B
SUPPORT FEET
1.Push the grey plastic covers in place at both ends of the rear support so that the support retainers are aligned with the oval holes of the covers. Fasten under the support with adjustment screws.
2. Place the rear support underneath the rear part of the frame.
3. Fasten the rear support with hex screws and washers.
4. Place front support underneath the front part of the frame and fasten with hex screws and washers.
PEDALS
1.The pedals are distinguished by the markings R (= right) and L (= left) on their shafts. Fasten the right pedal to the right pedal crank turning clockwise and the left pedal to the left pedal crank turning counterclockwise.
2. Fasten the pedal bands first into the retainer at the device. Thread the band through the pedal loop and push the band opening into the projection in the pedal.
3. Fasten the pedal bands to the pedal outside. Push the band through the locking buckle and the band locks automatically.
4. The length of the band can be adjusted with the locking buckle.
3
