Turbo Chef Technologies 2TM manual Preventing Oven Damage, Grounding Instructions

Models: 2TM

1 36
Download 36 pages 28.46 Kb
Page 8
Image 8

ii I M P O R T A N T S A F E T Y I N S T R U C T I O N S

Preventing Oven Damage

üClean the oven daily (page 8). Failure to do so will adversely affect cooking performance and shorten the life of the oven.

üOnce per month or more frequently depending on use, perform the deep cleaning procedure (pages 9-10). Failure to do so will adversely affect cooking performance and shorten the life of the oven.

üClean the oven only with TurboChef Oven Cleaner.

üOperate the oven only when food is in the cook chamber.

ûDO NOT clean with a water jet.

ûDO NOT slam or mishandle the oven door.

ûDO NOT frequently open and close the door to check the food.

ûDO NOT allow cleaning solution or water to remain in the cook chamber after cleaning or at

any other time.

üWhen servicing this appliance, do not tear insulation to get to components. Rather, find the edge of the insulation and remove the tape that holds it in place.

Grounding Instructions

Preventing Oven Damage WARNING: Improper grounding increases the risk of electric shock.

This appliance must be grounded. It is equipped with a cord that has a grounding wire and plug, which in the event of an electrical short circuit reduce the risk of electric shock by providing an escape wire for the electric current. The wire must be plugged into an outlet that is properly installed and grounded.

Consult a qualified electrician or serviceman for more information on grounding instructions or to determine if the appliance is properly grounded.

ûDO NOT use an extension cord. If the power supply cord is too short, ask a qualified electrician or serviceman to install an outlet near the appliance.

Power Cord Replacement

To avoid potential hazards, only the manufacturer, an authorized service agent, or a similarly-qualified person should replace a damaged power cord.

Page 8
Image 8
Turbo Chef Technologies 2TM manual Preventing Oven Damage, Grounding Instructions, Power Cord Replacement