Tyan Computer S2498 manual PnP/PCI Configurations

3.7 – PnP/PCI Configurations

Options related to all the configurations of PnP / PCI resources.

Phoenix – AwardBIOS CMOS Setup Utility

PnP / PCI Configurations

PNP OS Installed	[No]	Item Help
Reset Configuration Data	[Disabled]	_________________________
Resources Controlled By	[Auto (ESCD)]	Menu Level ►
X IRQ Resources	Press Enter	Default is Disabled.
PCI / VGA Palette Snoop	[Disabled]
		Select Enabled to
Assign IRQ For VGA	[Enabled]	Reset Extended System
Assign IRQ For USB	[Enabled]	Configuration Data
		ESCD> when you exit
		Setup if you have
		Installed a new add-on
		and the system
		reconfiguration has
		caused such a serious
		conflict that the OS
		cannot boot

↑↓←→: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

PNP OS Installed:

Select Yes if you are using a Plug and Play capable operating System. Select No if you need the BIOS to configure non-boot devices.

No /Yes

Reset Configuration Data:

This setting allow you to clear ESCD data.

Enabled / Disabled

Resources Controlled By:

Default whether system resources are controller by BIOS or by user.

Manual / Auto (ESCD)

PCI / VGA Palette Snoop:

Leave as default.

Enabled / Disabled

IRQ Resources:

Press Enter.

Assign IRQ For VGA and USB:

Set as follow:

Disabled / Enabled

48

http://www.TYAN.com