Uniden BCD996T manual Deleting a Location, Menu J Program Location JF

An Example of a POI Alert

The Uniden America Corporation is located at 4700 Amon Carter Blvd in Ft. Worth, TX. The Latitude and Longitude of the front entrance is 32° 50’00.63” N and 97°02’54.16” W.

When you program that data as a POI, you can select alert ranges of

.1, .25, .5, .75, 1.0, 1.5, and 2.0 mile distances to the POI. Shown on the map are .5 and 1.0 mile markers.

You are alerted when you come within range of your set distances.

4 Set Heading JF You can input the compass direction to the site from your present location or, you can select All Range which ignores your specific heading.

For example: If the Dangerous Road location is toward the Northeast and you are driving in that direction, then choose NE (45°)

If you know you will be driving on a road which has many curves to that site center, choose All Range which will trigger the alert regardless of direction as long as the other requirements (range, speed) are met.

If you travel in a Northeast direction and do not travel either side of a northeast line by up to 22 degrees, the alert system will function.

4 Set Speed Limit JF Choose from 0, through 100 MPH in 5 MPH steps or the equivalent in KPH for metric usage.

Deleting a Location

If you have programmed a location that you no longer want, you can delete it as follows.

[MENU] J Program Location JF

4 Select a location such as Dangerous Xing JF

124