Uniden BCD996T - page 88

88

4Set Audio Type JF

4Analog Only JF

At this point you can scroll to CTCSS or DCS and select the subaudible frequency

in the CTCSS range or the DCS code.

4CTCSS or DCS JF

This setting controls how a sub audible CTCSS or DCS is used for the channel.

Select your setting, then press F.

Off — any signal opens squelch. The default setting is Off.

Search — the scanner searches for and displays any CTCSS or DCS tone that

accompanies the transmission.

CTCSS — the scanner only opens squelch if the CTCSS tone you select is also

present with the signal. The scanner then prompts you to enter or scroll to the

desired tone.

DCS — the scanner only opens squelch if the DCS tone you select is also present

with the signal. The scanner then prompts you to enter or scroll to the desired

tone.

Set Lockout — the scanner does not stop on the channel if the tone you select

is present. The scanner prompts you to select a CTCSS or DCS tone.

Note: The scanner does not detect or decode a P25 digital signal if the channel or

search has CTCSS/DCS search turned on.

Quick CTCSS/DCS Save

If you set a channel to CTCSS/DCS Search and the scanner detects a tone, when

you press [EYES], the first option is Save found CTCSS/DCS?

[MENU] JProgram System JF

4 Select the conventional system JF

4Edit Group JF

4 Select a channel group JF

4Edit Channel JF

4 Select the Channel JF

4Set Modulation JF

Setting Channel Modulation Method C

Contents

Main Precautions Power Related Issues Table of Contents Page Page Table of Contents Page The FCC Wants You To Know Scanning Legally Page Introduction Feature Highlights General Page Page GPS Weather Search Auto Store Priority Memory Storage Limits Search Lockout Limits About This Manual Using the Scroll Control Page A Short Users Guide to Assist the First-Time Scanner Enthusiast Page Understanding Scanning and the BCD996T Understanding the Scanners Memory Understanding Quick Keys What is Scanning? What is Searching? What is CTCSS/DCS? Conventional Scanning Simplex Operation Repeater Operation What is Trunk Tracking? Trunked Scanning Types of Trunking Systems Motorola Trunking EDACS Trunking LTR Trunking Startup Configuration Setup/Operation Multi-Site Trunking I-Call (Motorola/EDACS) Where To Get More Information Information On The Internet Included With Your Scanner Setting Up Your Scanner Base Station Page Setting Up an Audio Recording Device or Computer Recording Vehicle Installation Mounting Using the Bracket Mounting Using the DIN-E Sleeve Page Removing the Scanner from the DIN-E Sleeve Mounting Using ISO Technique Removing the Display Sticker Connecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension Speaker Controls, Keys, and Functions + F Page Page Controls, Keys, and Functions A Look At The Display Operation Turning On the Scanner and Setting the Squelch Startup Key Operation 4Edit Custom JF 4Select a Custom RangeJF 4Search with Scan JF 4Set Startup KeyJF Scanning Systems Preprogrammed System Tips Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking Systems Locking/Unlocking Channels ID Scan/ID Search Mode Holding On a System Holding On a Channel Quickly Storing an ID During ID Search Quick-Storing Channels or Talk Group IDs (TGID) Trunking Activity Indicators Page Optimizing P25 Performance Page Using the Menu Programming General Settings Setting and Using the Backlight Setting the Dimmer 4Set Backlight JF 4Set Dimmer JF Adjusting the Key Beep Setting the Audio AGC Setting the Display Orientation Adjusting the Display Contrast Setting the GPS Format Setting the Serial Port Speed Displaying Scanner Information Initializing the Scanners Memory Connecting Your Scanner to a Personal Computer Volume/Squelch with PC Control Wired Cloning Page Programming Your Scanner General Notes System Settings System Options Page Site Settings Channel Settings Programming Conventional Systems 4New System JF 4Conventional JF Programming Trunked Radio Systems 4New System JF Editing the System Name MECL Programming System Settings Page 4Set Startup Key JF 4Set Lockout JF Page 4Set LocationInfo JF 4Select a Motorola Type I system JF 4Edit Fleet Map JF Page 4Select a Motorola Type I, II or EDACS Wide/Narrow system JF 4Emergency Alert JF 4JSet Level JF 4Select an EDACS Wide/Narrow system JF 4EDCS ID Format JF Page 4Adjust P25 Level JF Adjust the P25 Decode Threshold C Editing Sites MESL Editing Channel Groups MECL 4Select the existing system JF 4Copy System JF 4Select the existing system JF 4Delete System JF Programming Sites MESL Page Page Page Page Page Page Programming Channel Groups MECL Page Programming Channels MECL Page Page Page Page Page Page Page Searching and Storing Service Search 4Service Search JF F+ [SCAN/SEARCH] JF Quick Search Custom Search 4Custom Search ... JF F Editing a Custom Search Range 4Edit Custom JF 4Custom 1, Custom 2 to Custom 10. JF F Search With Scan Page Set Delay Time 4 to select a value from 1 sec,2 sec,3 sec,4 sec,5 sec, and Off. J Set Attenuator 4 to select to choose an attenuation for all frequencies in the range. JF 4 Saving a Found Channel (Quick Save) Auto Search and Store Selecting a System to use for Storing 4Search and Store JF 4 Select the system for storing the frequencies or talk group IDs JF Conventional Search and Store Trunked Search and Store Using the Close Call Feature Setting Close Call Options Page Close Call Hits Close Call Hits with Scan 4Hits with Scan JF 4Set Quick Key or Set Lockout or Set Hold Time JF Search and Close Call Options Managing Locked-Out Frequencies Page 4 Finding Repeater Output Frequencies 4Srch/CloCall Opt JF Page Setting Attenuation 4Set Attenuator JF Setting Data Skip 4Set Data Skip JF Page Adjust P25 Level 4Adjust P25 Level JF Priority Scan Page Using Weather Alert (SAME) Searching For a Weather Broadcast 4Weather Scan JF F Turning Weather Alert On/Off 4Weather Alert JF F Programming a SAME Group 4Program SAME JF Setting WX Alert Priority 4WX Alt Priority JF 4 Fire Tone-Out Setting Tone-Out Standby 4Tone-Out Standby JF Setting Up Tone-Out 4Tone-Out Setup JF Page Tone-Out Multi-Channel Monitoring 4 Using the BCD996T with a GPS Device Compatibility Connecting Your Scanner to a GPS Device Initial Scanner/GPS Operation Location-Based (GPS) Scanning Non-Radio Location Based GPS Features Setting the Options 4Select a location type (POI, Dangerous Xing, or Dangerous Road). JF 4New Location JF 4Edit Name JF 4Set Type JFAt this level you have an opportunity to reassign or edit the For POI Only 4Set Alert Beep JFChoose Off so no tone sounds or one of the four For Dangerous Xing, and Dangerous Road Only 4Set Alert Volume JFSelect from 15 sound levels, plus Auto and Off. As 4Set Heading JFYou can input the compass direction to the site from your 4Set Speed Limit JFChoose from 0, through 100 MPH in 5 MPH steps or 4Select a location such as Dangerous Xing JF Deleting a Location 4Location to be deleted JF 4Delete Location JF 4Confirm Delete? Yes=E / No=. JF GPS Display Mode GPS Review Location Mode F 4 Care and Maintenance General Use Location Cleaning Repairs Troubleshooting If you experience difficulty while in TrunkTracker mode, try the following steps. Page Specifications Certificated accordance with FCC Rules and Regulations Part 15 Subpart C as of date of manufacture. Specifications Page Reference Preset Fleet Maps Preset Map 7 Preset Map 8 Preset Map 9 Preset Map 10 Preset Map 13 Preset Map 14 Preset Map 11 Preset Map 12 User Defined Fleet Maps Type I Programming Information Size Code Restrictions Preprogrammed Systems and Lockout Options Preprogrammed Systems with Quick Keys State, or City Area Quick Key CTCSS Frequencies DCS Codes Page Index Page Page Page One-Year Limited Warranty