Uniden BCD996T manual Setting the Display Orientation, Adjusting the Display Contrast

Off — Press F to select.

Setting the Display Orientation

[MENU] J 4 Settings JF

4Set Upside-down JF

This setting controls the orientation of the display. If you set Upside-down to On, the scanner inverts the display text and graphics.

Adjusting the Display Contrast

There are 15 contrast levels. As you scroll from level 1 to 15 you see the contrast change. Press the Scroll Control to lock the desired level until the time you desire to change it.

[MENU] J 4 Settings JF

Adjust Contrast J F

4 Select a level Level 1 to Level 15 J F

Setting the GPS Format

[MENU] J 4 Settings J F

4 Set GPS Format F

These settings control how the scanner handles GPS input when you are using the location-based functions.

Setting the Position Format

[MENU] J 4 Settings JF

4 Set GPS Format JF

4 Set Pos Format JF

This setting controls the format used for entering GPS coordinates into the scanner.

DMS: DDD° MM’ SS.ss — Enter the location in Degree, Minute, Second format.

DEG: DDD.dddddd — Enter the location in Degree and fraction format.

Programming General Settings

57