Uniden BCD996T manual Setting the Group Quick Key, Editing Channels, Locking Out Channel Groups

Follow these steps to enter/edit the group name.

1.The current name displays with the first character of the name highlighted.

2.Rotate the Scroll Control to select a new first letter. Press [6] to move one character to the right. Repeat the Scroll Control action to change the character. To move one character to the left, press [4].

3.Repeat Step 2 until you have entered the system name. Then press F to accept the setting.

Notes:

•Each group name can be up to 16 characters. Abbreviate as necessary to fit.

•The group and system (for conventional, SCAT, and LTR systems) or site (for Motorola and EDACS systems) name alternate in the top line of the display when the scanner stops on a channel.

•Press [.No] twice to delete the current character.

•Press [.No] three times to clear the entire alpha tag.

Setting the Group Quick Key

To assign a Quick Key to a Group, follow these steps.

[MENU] J Program System JF

4Select a trunked system JF

4Edit Group JF

4Select the Group JF

4Set Quick Key JF

Select a desired quick key for this Group.

Editing Channels MECL

Once you create a channel group, store channels in that group. See “Programming Channels” on Page 85 for specific channel options.

Locking Out Channel Groups MECL

[MENU] J Program System JF

4Select an existing system JF

4Edit Group JF

4Select an existing group JF

4Set Lockout JF

84