Uniden BCD996T manual Mounting Using the DIN-E Sleeve

drill carelessly, expensive damage can result. If in doubt, consult your vehicle dealer’s service department or a qualified professional installer.

Important: AVOID AIRBAG DEPLOYMENT ZONES. Ignoring this installation concern may result in bodily harm and the inability of the airbag to perform properly.

Mounting

Screws

Star Washers

1.Using appropriate screws or other hardware, secure the bracket.

2.Insert the scanner and insert the bracket knobs to lock the scanner in position.

3.Attach the Cigarette Lighter Power Cord to the rear of the scanner and plug the adapter end into a dash mounted 12V DC socket.

4.Attach a suitable mounted mobile antenna to the antenna jack on the back of the scanner.

Mounting Using the DIN-E Sleeve

If you are unsure about how to install your scanner in your vehicle using the DIN-E sleeve, consult your automobile manufacturer, dealer, or a qualified installer. Before installing, confirm that your scanner fits in the desired mounting area and you have all the necessary materials to complete the task. Your scanner requires a

2x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area. Allow an additional

2-3/8 inch (60 mm) space behind the unit for connectors and wires.

34