Uniden BCD996T manual Setting the System Hold Time, Setting ID Scan/ID Search, Setting Data Skip

Setting the System Hold Time C

[MENU] J Program System JF

4Select a conventional system JF

4Edit Sys Option J F

4Set Hold Time J F

Set how long the scanner will remain scanning on this system before moving to the next system (up to 255 seconds). Note that the scanner will scan all unlocked channels at least one time, regardless of the system hold time setting.

Setting ID Scan/ID Search MEL

[MENU] J Program System JF

4Select a system JF

4Edit Sys Option JF

4ID Scan/Search JF

Sets whether the scanner only stops on talk groups you have programmed in (ID Scan) or whether the scanner stops on any unlocked channel (ID Search).

Setting Channel Delay Time MELCS

[MENU] J Program System JF

4Select a system JF

4Edit Sys Option JF

4Set Delay Time JF

This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from [1] to [5] or Off,

then press F.

Notes:

•The default setting is 2 seconds for each system.

•This setting applies to all channels within the system.

Setting Data Skip C

[MENU] J Program System JF

4Select a Conventional system JF

4Edit Sys Option JF

4Set Data Skip JF

70