Uniden BCD996T manual For Dangerous Xing, and Dangerous Road Only, For POI Only

4 Set Type JF At this level you have an opportunity to reassign or edit the location type you first selected and set the location to either one of the other types or change the data in an existing location.

4 Set LocationInfo JF Input the latitude and then the longitude.

4 Set Lockout JF As you near your target location, an alert sounds at 0.5, 0.25, and 0.1 mi. You can stop this operation by pressing [L/O]. All the data is retained.

You can use the menu Lockout option as well. Set the location system to Temporary L/O so you can move away more than four miles and then come back again. At that time, L/O status is automatically canceled.

If you turn off the switch, the scanner is unlocked.

For POI Only

4 Set Alert Beep JF Choose Off so no tone sounds or one of the four alert melodies Alert 1 to Alert 4.

Once you make a Tone selection you are immediately asked to assign a volume level to that selection.

Set Alert Volume JF Select from 15 sound levels, plus Auto and Off. As you rotate the Scroll Control the Alert tone you set is played louder and louder. Press F to select a volume level. You can also select Auto, a level that is the same setting as your master volume control.

4 Set Range JF Input how far away the alert sounds for the site (only available for POI’s and between .1 and 2.0 miles)

For Dangerous Xing, and Dangerous Road Only

The Alert Tone is fixed. The alert range is auto-set at .5, .25, and .1 mile.

4 Set Alert Volume JF Select from 15 sound levels, plus Auto and Off. As you rotate the Scroll Control the Alert tone is played louder and louder. Press F to select a level you want. You can also select Off (no sound) or Auto, a level that is the same as your master volume control.

For Dangerous Xing and Dangerous Road sites there are two additional settings:

Using the BCD996T with a GPS

123