Uniden BCD996T manual 131

Problem	Possible Cause	Suggestion
Scanner won’t acquire	The squelch might need to be	Adjust the squelch threshold. See
the data channel.	adjusted.	“Turning On the Scanner and Setting the
		Squelch” on Page 45.
	The frequency used for the	Check your frequency list for the data
	data channel might be	channel.
	missing.
Missing replies to	The scanner might need to be	Change to a Type 1 scanner setup. See
conversations.	changed to a Type 1 scanner	the programming instructions on the web
	setup.	at www.uniden.com/scanners.
	The fleet map might be	Try another preset fleet map or program
	incorrect.	your own fleet map.
	One or more of the system’s	Make sure all the system’s frequencies
	frequencies might not be	have been entered.
	entered.
	The system you are trying to	Set the scanner to scan LTR or EDACS
	scan might be LTR or	systems. See the programming
	EDACS.	instructions on the web at
		www.uniden.com/scanners.

If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number are listed in the Warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800) 297-1023.

If you have Internet access, you can visit

http://www.uniden.com for additional information.

Troubleshooting

131