Set Delay Time

Choose a delay time to set how long the scanner stays on a transmission after it ends.

4 to select a value from 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, and Off. JF

Set Attenuator

Choose to attenuate all frequencies by about 20 dB.

4 to select to choose an attenuation for all frequencies in the range. JF

On — the frequencies are attenuated.

Off — the frequencies are not attenuated.

Set Record

4 to enable real time audio output from REC to an audio recording device.

On — the scanner outputs the signal. Then press F to select.

Off — the scanner does not output any audio. Then press F to select.

Assigning a Search Range to a Search Key

You can assign any of the Service or Custom Searches to the six Search keys for quick access to your favorite searches.

[MENU] J 4 Search for ... JF 4 Set Search Key JF

4 Select the key to assign JF

4 Select a search range JF

[MENU] J 4 Search for ... JF

Now, to access that search, hold on any channel, then press F and the number key [1] to [6] corresponding to the search range.

The default settings are:

SRCH 1: Custom 1

SRCH 2: Public Safety

SRCH 3: Railroad

SRCH 4: FRS/GMRS

SRCH 5: TV Broadcast

SRCH 6: FM Broadcast

98

Page 98
Image 98
Uniden BCD996T manual Set Delay Time, Set Attenuator, Assigning a Search Range to a Search Key, Menu J 4 Search for ... JF