Uniden BCD996T manual Setting Up a Channel Group, Editing a Channel Group Name, Deleting Sites

Auto — the scanner automatically adjusts the digital decode threshold to match the transmission you are hearing when it receives a strong signal and has a high decode rate.

Manual — lets you manually adjust the digital decode threshold. To manually adjust the P25 level, select Manual.

Default — sets the digital decode threshold to the default value. Use this setting to return to the value that usually provides adequate performance. This is handy is you have manually adjusted the value to a setting that prevents proper decoding.

Note: This setting has no effect on how these sites are received.

Deleting Sites ME

[MENU] J Program System JF

4Select a trunked system JF

4Edit Site JF

4Select a site JF

4Delete Site JF

Confirm Delete? Yes=”E” / No= ”.”

Important: Deleted sites cannot be restored. You must re-enter them.

Programming Channel Groups	MECL
Setting Up a Channel Group	MECL

[MENU] J Program System JF

4Select a system JF

4Edit Group JF

4New Group F

The scanner creates a group with a default name of Group n. n increments by one for each new group you create within a system.

Editing a Channel Group Name MECL

[MENU] J Program System JF

4Select a system JF

4Edit Group JF

4Select a Group JF

4Edit Name JF

Programming Your Scanner

83