Uniden DECT 4096, DECT4096 Series manual Setting Up Your Phonebook, Creating a new entry

Setting Up Your Phonebook

Creating a new entry

Open the phonebook with the phone in standby, and press New. The phone walks you through the phonebook entry items in the order listed below. On each screen, press OK when you're finished editing the item or if you want to skip the item:

Edit	Enter the name (up to 16 characters) you want to use for this
Name	entry.
	Enter the primary number (up to 32 digits) for this entry
	exactly the way you would dial it.
Edit	- If you need the phone to wait before sending the next set of
	digits, press Redial/pause to enter a two-second pause.
Number1
	- If two seconds isn't long enough, you can enter as many
	pauses as you want.
	- Each pause counts as one digit (you'll see a P in the number).
Edit	Enter the secondary number for this entry just like you did the
Number2	primary number.
Personal	(Handset only) Choose the ring tone you want the handset to
Ring	use when this person calls. As you highlight each ring tone,
selection	the handset sounds a sample of that tone.
	Select the speed dial number (SPD0 through SPD9) you want
	to assign to this entry.
	- The speed dial numbers correspond to the numbers (0
Speed	through 9) on the twelve key dial pad.
	- Each speed dial number can be assigned to only one entry.
Dial
	- If the speed dial number is already assigned, the phone
	shows the name of the entry assigned to the number. If
	you want to change it, select the number, and the phone
	overwrites the existing assignment.

26