Uniden DECT4096 Series, DECT 4096 manual Weak or Hard To Hear Audio

If…	Try…
A handset can't	- Making sure no other handset is using the system.
access the answering
system.	- Making sure the phone is in standby.
My outgoing	- Seeing if there was a power failure. You may have
message is gone.	to re-record your personal outgoing message.
I can’t hear the base	- Making sure call screening is turned on (see page
	36).
speaker.
	- Changing the base speaker volume.
Messages are	- The incoming messages may be too long. Remind
	callers to leave a brief message.
incomplete.
	- Deleting messages (the memory may be full).
The system keeps	- You may have to change the line mode. Contact
recording if I answer
	customer service for more information.
on an extension.
I can't register a	- Seeing if there are 10 handsets registered to this
	base.
handset.
	- Resetting the handset.
My alarm rings at the	- Making sure the time is set correctly (see page 17).
wrong time.
My alarm won't ring	- Making sure the days are selected (see page 32).
on the right day(s).	- Making sure the date is set correctly (see page 17).

Weak or Hard To Hear Audio

If a caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak.

Try moving around while you’re on a call or moving closer to the base to see if the sound gets louder.

Make sure the handset’s battery is fully charged.

Try adjusting the earpiece volume.

42