Uniden DECT4096 Series, DECT 4096 manual Delete your greeting, Ans. Setup menu options

Delete your greeting

1.Open the menu and select Ans. Setup.

2.Select Line 1 or Line 2, then select Greeting Options.

3.While the system plays back the current greeting, press Delete to erase the personal greeting for this line. (You can't erase the pre-recorded greeting.)

Ans. Setup menu options

You can change the answering system options separately for each line. When you select the Ans. Setup menu, the phone prompts you to select Line 1 or Line 2. Then, you can choose one of the following options to change the answering system settings for that line:

Security Code	Enter a 2-digit PIN so you can access your answering
	system from any touch-tone phone (see page 39).
	Set the number of rings (2, 4, or 6) before the answering
Ring Time	system answers the phone. Choose Toll Saver (TS) to
	have the system pick up after 2 rings if you have new
	messages or after 4 rings if you don't.
	Set the amount of time callers have to leave a message,
Record Time	either 1 minute or 4 minutes. Choose Announce Only
	if you don't want the system to let callers to leave a
	message.
	Have the system beep every 15 seconds when you have
Message Alert	a new message; the beeping stops when you listen to all
	your new messages. (To mute the alert without listening
	to your messages, press any key on the base.)
Ans. Language	Change the language of the system's voice prompts.
Call Screen	Turn on the call screen feature so you can hear callers as
	they leave messages on the base speaker (see page 38).
Ans. On/Off	Turn your answering system on or off. (To turn your
	system on or off from the base, just press On/off.)
Record Greeting	Record a personal greeting (see page 35).
Greeting	Switch between your personal greeting and the pre-
	recorded greeting or delete your personal greeting (see
Options
	page 35).

36