Uniden DECT4096, DECT 4096 manual Resetting and Registering Handsets, Registering a handset

static on telephones. A DSL filter or telephone line filter usually solves this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store.

Plug the DSL filter into the telephone wall jack and plug your phone’s base into the filter. Make a test call to make sure the noise is gone.

Telephone cord

Telephone wall jack

DSL filter

Resetting and Registering Handsets

If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset:

Do you have the base the handset is registered to?

	Yes		No
1.	Press and hold End and # until the	1.	Press and hold End and
	System Reset menu appears (about 5		# until the System Reset
	seconds).		menu appears (about 5
2.	Select Deregister HS. The display lists		seconds).
	all registered handsets.	2.	Select Base Unavailable.
3.	Select the handset you want to reset.	3.	When the handset asks
4.	When the handset asks you to confirm,		you to confirm, select Yes.
	select Yes. (It may ask you twice, just		(It may ask you twice, just
	to be sure.) The handset clears its		to be sure.) The handset
	information from the base and deletes		deletes its own link without
	it own link to the base.		contacting the base.

When you reset a handset (or if you buy a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.

Registering a handset

1.On the base, open the menu and select Register Handset. The display should say Handset Registering.

2.On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).

44