Uniden DECT 4096, DECT4096 manual Installing Your Phone, Set Up the Base, Attach the stand

Installing Your Phone

Set Up the Base

Attach the stand

Before you attach the stand, you have to decide if you want the phone to rest on a desk or hang on a wall.

For desktop use

1.Turn the stand so the word Desk is right- side up (it will be on the right).

2.Insert the tabs into the notches marked Desk at the top of the base.

WALL

DESK

WALL

DESK

3.Press in on the latch and slip it into the notch.

For wall mount use

1.Turn the stand so the word Wall is right- side up (it will be on the right).

DESK

WALL

DESK WALL

2. Insert the tabs into the notches marked Wall at the bottom of the base.

3. Press in on the latch and slip it into the notch.

To remove the stand

Press in on the latches and slide them out of the notch.

Connect the corded handset

Use the coiled cord to connect the corded handset to the connector on the left side of the base.