Uniden DECT4096 Series, DECT 4096 manual Test Connection, Test Line, Try, Check

4.Place the mounting slots over the pins

on the wall plate, and slide the base down to lock it into place.

Test the

Connection

DESK

WALL

DESK

WALL

Pick up the corded	for second line.)
	(To telephone jack

handset from the base. The phone should pick up line 1 automatically and change the

display to show Talk , and you should hear a dial tone. When you

get a dial tone, make a test call.

If...		Try...
the display says	Check	checking the connection between the
		base and the phone jack: make sure the
or you don't hear a dial tone
		cord is connected to Tel Line 1/2.

you keep hearing a dial tone setting line 1 to pulse dialing (see page 4).

there's a lot of noise or static see page 43 for tips on avoiding interference.

Test Line 2

Once you can make calls on line 1, make a test call on the second line. Pick up the corded handset and press the unmarked key under Line2. You should hear a dial tone and the display should show Talk .

SUN 12:00A

12/31/08

LINE1 MENU

0

0

LINE2

If...		Try...
		checking the connection between the
the display says	Check	base and the phone jack: if you have a
or you don't hear a dial tone		separate jack for each line, make sure the
		cord is connected to Tel Line 2.

you keep hearing a dial tone setting line 2 to pulse dialing (see page 4).