Connect the charger, Test the connection | Uniden DECT4096 specification

4. Place the cover over the battery compartment and slide it up into place.

Connect the charger

1. Connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)

2. Plug the other end of the adapter into a standard 120V AC power outlet.

3. Place each handset in a charger with the display facing forward. The charge light should turn on.

If...	Try...
the charge	- reseating the handset.
light doesn't	- checking the AC adapter connection.
turn on	- seeing if the outlet is controlled by a wall
	switch.

Charge all handsets completely (about 15 hours) before using them.

Test the connection

Pick up each handset and press Talk. You should hear a dial tone, and the display should say Talk. (Press End to hang up.)

If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 44).

Page 7

Image 7

Uniden DECT 4096, DECT4096 Series manual Connect the charger, Test the connection

Contents

Phone Number DECT4096 Series Users GuideWhats in the box? You will also find Whats in the manual? Important Safety Instructions Connect the corded handset Installing Your PhoneSet Up the Base Attach the stand Place the phone on the wall Connect the power and telephone cordsFor desktop use For wall mount use Check Test ConnectionTest Line Try Install the battery Set Up the Accessory HandsetsChanging from Tone to Pulse Dialing Test the connection Connect the charger Key name What it does Icon Getting to Know Your PhoneParts of the Base Base keys and how they work During text entry move the cursor to the right Increase the speaker volumeStandby start playing messages Standby or during a call open the Caller ID list Parts of the Handset Standby turn the Do Not Disturb feature on or off seeStandby open the redial list Handset keys and how they work Base Icon Reading the DisplaysOn the base On the handset Base Icon Handset Icon What it means Answering system status iconsIcon What it means On the base Using the Soft KeysSoft keys with the phone in standby Soft keys in the main menu Common soft key descriptions Entering Text on Your Phone Handset Setup Using the Menus Menu option Use it to Display. Enter any name up to 10 characters Banner Special Feature Menus Working with Two Lines Using Your PhoneAssigning a primary line Conferencing two lines together Medium, or High Using the SpeakerphoneChanging the Volume When On the base On a handset Using the lists Using the Caller ID and Redial ListsDialing from the CID or redial list Caller ID and redial menu options Using Seven-Digit Dialing Using an Optional Headset Using Call WaitingFinding a Lost Handset Using the Phonebook Creating a new entry Setting Up Your Phonebook Editing an existing entry Phonebook Menu OptionsCopy All Chain Dialing One accessory handset to use this multi-station featureDelete Erase this entry Using Multi-Station Conference Calling Using Multi-station FeaturesExpanding Your Phone Using Call Transfer Using Privacy ModeFrom the base From a cordless handset Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Your Phone During a Power Failure Using Do Not Disturb Tuesday When an alarm rings Using Voice Message NotificationResetting the voice message indicator Recording your outgoing message Using the Answering SystemSetting Up Your Answering System Switch between the pre-recorded greeting and your greeting To your messages, press any key on the base Ans. Setup menu optionsDelete your greeting Your new messages. To mute the alert without listening Getting Your Messages Accessing your system from a handset remote operationHow to operate your answering system Icon Command Name Handset key Base key From the base From a handset Screening Your Calls Remember to make a note of your new security code Using the System While Youre Away from HomeProgramming a security code Dialing in to your system If… Try… Solving Problems Announce Only see Says Unavailable Weak or Hard To Hear Audio Static is Installing a line filter or DSL filterNoise or Static onO The lLine Here are some hints for when Do you have the base the handset is registered to? Yes Resetting and Registering Handsets# until the System Reset Registering a handset Registration Failed Handling Liquid DamageHandset Base 120V AC, 60 Hz Important InformationBase Charger PS-0034 PS-0035 Compliance Information FCC Part 15.105b FCC Part 15 information Terminal equipment Radio equipment RF exposure information 574,727 581,598 606,598 650,790 660,269 663,981 671,248

Connect the charger

Try...

Test the connection