Uniden DECT4096, DECT 4096 Connect the power and telephone cords, Place the phone on the wall

Connect the power and telephone cords

1.Connect the base AC adapter to the AC IN 7.8V jack and route the cord as shown:

For desktop use	For wall mount use
	DESK
	WALL
	DESK
	WALL
WALL
	DESK
	DESK
	WALL

2. Connect the included two-line telephone cord to the Tel Line 1/2

jack. If your phone
company uses a separate			Connect the
phone jack for each line,			DESK
			telephone cord
connect a standard			here first.
telephone cord to the Tel	AC IN 7.8V TEL LINE 2	TEL LINE 1/2	WALL
Line 2 jack. Route the cords	IF you have a separate
as shown above.
	jack for line 2, connect

3. Connect the cord from	another phone cord here.
Tel Line 1/2 to a two-line phone jack.

OR

If your phone company uses a separate phone jack for each line, connect the cord from Tel Line 1/2 to the jack for line 1; then, connect the cord from Tel Line 2 the jack for line 2.

4. Plug the AC adapter into a standard 120 V AC power outlet.

Place the phone on the wall

1.On the front of the base, pull the clip that holds the corded handset in place out of its slot.

2.Rotate the clip 180 degrees.

3.Flip it from front to back and slide it back into the slot.