Uniden DECT 4096, DECT4096 Series manual Screening Your Calls, From the base From a handset

To...	From the base								From a handset (during
									remote operation)
replay previous	Press Phonebook/left repeatedly								Press 1 repeatedly until
	until you hear the message you								you hear the message
messages	want to replay.								you want to replay.
skip a message	Press Caller ID/Right.								Press 3.
delete a	While the message is playing,								While the message is
message	press Delete.								playing, press 4.
	With the phone in standby, press
delete all of your	Delete. When the system						prompts		Not available.
							Line1
messages	you to select a line, press
	or	Line2	.
play old	After the system plays the new messages,
	press Play/stop again. When the
messages	system prompts you to select a								press 2.
	line, press			Line1	or	Line2		.
exit the system	Press Play/stop.								Press End.

Screening Your Calls

Another feature your answering system gives you is call screening. While the system is taking a message, you can hear the caller on the base speaker (if you turn on Call Screen) or from a handset.

To...	From the base			From a handset
hear the caller	Just listen to the caller over			Press		.
					Screen
leaving a message	the speaker.
answer the call	Pick up the corded handset.			Press Talk/flash.
mute the call screen	Press		.
		Mute
without answering

If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.

Up to four handsets at a time can screen calls. If a fifth handset tries to screen the call, the handset sounds an error tone and displays a System Busy message.

38