Uniden DECT 4096, DECT4096 Important Information, Base Charger, PS-0034 PS-0035, 120V AC, 60 Hz

	Important Information
Terms Used In This Guide
Accessory	An extra handset that can register to and be used with an expandable phone base. All
Handset	accessory handsets must be registered to a base.
Base	The main part of the phone. It connects to your phone line and lets you make and receive
	calls. Most bases also have a cradle to store a handset.
CIDCW	(CID on Call Waiting.) A service that shows CID for calls that come in during another call.
Call Waiting	A service that lets you receive calls while you are on another call.
Caller ID	(Also called CID.) A service that shows the name and number of incoming callers.
Charger	A cradle that stores and charges a handset but doesn’t connect to the phone line.
Cradle	The part of the phone that stores a handset. While in a cradle, a handset is always in
	standby, and any keys are locked.
During a call	The station is currently on a call or has activated a dial tone.
Handset	1) A cordless handset that you use to dial the phone and talk to callers.
	2) A corded handset that attaches to a base with a coiled cord.
In standby	The phone is inactive: there is no dial tone, no station is on a call or listening to messages.
Line 1 and	On a two-line jack, line 1 is connected to the inner pair of wires, and line 2 is connected
	to the outer pair of wires. If you want to switch the lines, contact your phone company.
Line 2	On single-line jacks, line 1 is connected to Tel line 1/2, and line 2 is connected to
	Tel line 2. You can switch Line 1 and Line 2 just by swapping the connectors.
Off hook	The phone is connected to an outside line: there is a dial tone or an ongoing call.
Soft key	A software-controlled button that can change its function to fit the current operation.
Station	Any handset or the base.

Specifications

		Base	Charger
AC	Part number	PS-0034	PS-0035
adapter	Input voltage	120V AC, 60 Hz	120V AC, 60 Hz
	Output voltage	7.8V AC @ 450mA	8V AC @ 300mA
Battery	Part number	BT-1018
pack	Capacity	500mAh, 2.4V DC

Use only the supplied AC adapters.

Be sure to use the proper adapter for the base and any chargers.

Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

Do not place the base in direct sunlight or subject it to high temperatures.

Battery Information

Fully charged, the battery should provide about 10 hours of talk time and about 7 days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged.

Keep an eye on the battery status icon. When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery