Uniden UBC3500XLT Wired Cloning,

42

Wired Cloning

  Wired Clone  

•Master Sets the scanner to be the source scanner.

•Slave Sets the scanner to be the recipient scanner.

To clone (copy) data directly from one UBC3500XLT

scanner to another UBC3500XLT scanner, you must

first connect the scanners to each other using the

included connection cables and a DB9 null modem

adapter and DB9 gender changer (neither included),

available at most computer stores. Then you must set

one scanner as the source and the other as the

destination.

Plug the smaller end of each of the included connection

cables into Remote on the right side of each scanner.

Then connect the other end of the cables together

using the null modem connector and gender changer.

Then set the scanner containing the programming you

want to transfer as the master scanner, then set the

other scanner as the slave scanner.

(Master scanner) Clone Master Press SCAN Key



(Slave scanner) Clone Slave Press SCAN Key



When you are ready to clone the scanner, press

on the slave scanner first, then on the master scanner.

The master scanner checks the connection between the

two scanners, then transfers its data to the slave scanner.

When the transfer is complete, Complete appears on

both scanners. If the transfer did not work, Error

appears on the master scanner.

Menu

Scan

Scan

Scan

UB347ZH.fm Page 42 Thursday, August 31, 2006 11:57 AM

Contents

Main Precautions Precautions Contents Page Contents Introduction Introduction Introduction UB347ZH.fm Page 7 Thursday, August 31, 2006 11:57 AM Band Plan 2 Band Plan 3 Feature Highlights Feature Highlights General Feature Highlights Search Auto Store Feature Highlights Priority Backlight and Power Key Controls PC Control and Cloning About This Manual Using the Multifunction Scroll Control Entering Text Page Page Understanding Scanning Understanding Scanning Understanding the Scanners Memory What is Scanning? What is Searching? What is CTCSS/DCS? Page Conventional Scanning Simplex Operation Repeater Operation Where To Get More Information Information On The Internet Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your Scanner Using Internal Batteries Using Rechargeable Batteries Removing the Display Sticker Using AC Power Connecting the Antenna Connecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension Speaker Attaching the Belt Clip Attaching the Wrist Strap A Look At The Keypad + Page A Look At The Display Page Using Menu Using Func Basic Operation Basic Operation Turning On the Scanner and Setting the Squelch Amateur Radio 145.2000MHz Scanning Systems Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking Systems Locking/Unlocking Channels Temporarily Holding On a System Holding On a Channel Quick-Storing Channels Quickly Recalling Channels Toggling Channel Alpha Tags Using the Menu Using the Menu Using the Menu Menu Item Submenu Settings Settings Displaying System Information Adjusting the Key Beep Locking/Unlocking the Keypad and Scroll Turning Power Save On or Off Priority Scan Using the Backlight Setting the Audio AGC Adjusting the Display Contrast Initializing the Scanners Memory Connecting Your Scanner to a Personal Computer Settings Using the Cloning Options Wired Cloning Programming Radio Systems Programming Radio Systems Programming Radio Systems Programming Conventional Systems Page Page System-Level Settings Page Page Group-Level Settings Page Channel-Level Settings Page Page Page Page Page Page Page Searching and Storing Searching and Storing Service Search Changing the step of Air Band Quick Search Custom Search Searching and Storing Editing a Custom Search Range Edit Custom Editing a Service Search Edit Service Searching and Storing Auto Search and Store Selecting a System Search and Store Select the range from Custom Search or Air Using the Close Call Feature Using the Close Call Feature Setting Close Call Options Page Page Close Call Hits Search and Close Call Options Search and Close Call Options Managing Locked-Out Frequencies Unlocking All Frequencies Searching for Subaudible Tones Screening Out Broadcast Sources Setting the Maximum Auto Store Value Setting the Modulation Type Setting Attenuation Setting Data Skip Setting the Delay Time Setting the Search Frequency Step Setting Air Band Step Using Tone-Out Using Tone-Out Fire Tone-Out Introduction Using Tone-Out Notes: Page Care and Mainte-nance Care and Maintenance Care and Maintenance General Use Location Page Troubleshooting Troubleshooting Troubleshooting If your UBC3500XLT is not performing properly, try these steps. Problem Possible Cause Suggestion Memory Error Specifications Specifications Specifications Page Page Appendix Appendix Initial Setting of the Menus. Appendix Page Planning Planning Planning Collecting Information Filling Out The Conventional System Worksheet System Name and Quick Key Group Name and Quick Key Page Page Declaration of Conformity Declaration of Conformiry