Uniden UBC3500XLT owner manual Select Mode

UB347ZH.fm Page 67 Thursday, August 31, 2006 11:57 AM

CCDND (Do Not Disturb) - The scanner checks for a Close Call hit every 2 seconds only if the scanner is not currently stopped on a transmis- sion. If the scanner is on a transmission the scanner waits until the signal ends to perform a Close Call check. This prevents breaks in audio during Close Call checks.

CCPRI - Close Call works even if there is a transmission. Checks for a Close Call hit every 2 seconds.

Off - Close Call is turned off for all mode.

Note:You can also toggle this setting by pressing Func then

•Set CC Override: Lets you select how the Close Call feature works with other scanning activities.

On -If the scanner detects a Close Call frequency, CC Found! and Press Any Key appear, and the Close Call frequency is dis- played by pressing any key while it is detecting.

Off - If the scanner detects a Close Call frequency, CC Found! and “E” to Listen appear for the period which you have set at Set CC Pause (See page 68). Press E to display the Close Call frequency during that period.

Turn the scroll control to display an option, then press the scroll control.

•Set CC Alert: Lets you select how the scanner alerts you when it receives a Close Call signal. You can select any of the following options.

Select Mode

•Beep (the scanner beeps when it receives a Close Call signal)

•Light (the backlight turns on when it receives a Close Call signal)

Using the Close Call Feature

67