Uniden UBC3500XLT owner manual Using Tone-Out

UB347ZH.fm Page 77 Thursday, August 31, 2006 11:57 AM

•Edit Name - Sets the name for the selected tone- out setting.

•Set Frequency — Sets the tone-outs RF frequency parameters.

Edit Frequency — Enter the desired fre- quency that the scanner should monitor for the tone-out.

Set Modulation — Set the modulation type for the paging signal.

Auto —The scanner uses the default modu- lation for the frequency band. If the default modulation is AM or WFM, the modulation operates as FM.

FM — The scanner uses FM for the frequency band. This is the default setting.

NFM — The scanner uses NFM modulation.

Set Attenuaton — Turn the scroll control to select On or Off.

•Set Tone — Sets the audio tone frequency for the page.

Edit Tone A — Set the audio frequency for Tone A

Edit Tone B — Set the audio frequency for Tone B

Notes:

•For two-tone pages, enter a value for A and B.

•For one-tone pages using short tones of less than 3.75 seconds, enter the tone value for A, and 0 (zero) for B.

•For long-tone pages, such as group pages of more than 3.75 seconds, enter 0 (zero) for A and the tone value for B.

Using Tone-Out

77