Uniden UBC3500XLT owner manual Setting the Channel Frequency Modulation, Set Moduration

UB347ZH.fm Page 55 Thursday, August 31, 2006 11:57 AM

Notes:

•The default setting is Off.

•See “What is CTCSS/DCS?” on Page 16 for a complete list of CTCSS and DCS tones.

Setting the Channel Frequency Modulation

Menu

Program System

Select the system

Edit Group

Select the group

Edit Channel

Select the channel

Set Moduration

Auto - the scanner uses the default modulation for the frequency band.

AM - the scanner uses AM (amplitude modulation) for the frequency band.

FM - the scanner uses FM (frequency modulation) for the frequency band.

NFM - the scanner uses narrowband FM for the frequency band.

WFM - the scanner uses wideband FM for the frequency band.

WFM (Broadcast)- the scanner uses WFM Broadcast for the frequency band.

Note: The default setting is Auto.

This setting controls the modulation method used for the frequency band. In most cases, if you leave this set to Auto, the scanner automatically selects the correct modulation type for the system you are programming.

Programming/Editing Optional Settings

55