Uniden UBC3500XLT owner manual Using the Menu, Menu Item Submenu

UB347ZH.fm Page 36 Thursday, August 31, 2006 11:57 AM

Using the Menu

The scanner’s menu lets you select options that let you set up and use the scanner.

To use the menu, press Menu on the left side of the scanner. To select a menu item, rotate the scroll control clockwise or counterclockwise. The currently- selected menu item is highlighted with a bar on the display. When the menu item you want to select is highlighted, briefly press the scroll control to select it. To back up a level, press Menu . To exit the menu mode, press Menu again or the L/O key.

This table shows the scanner’s menu structure. To find information about a particular menu setting in this manual, go to the page number shown in parentheses next to the setting.

Note: Not all of the options shown in this table may appear at the same time. To view all available options on any screen, rotate the scroll control.

Menu Item		Submenu
				(32)
	--M E N U --		Select System
			New System
	Program System
	Srch/CloCall Opt
	Search for ...
	--M E N U --		Srch/CloCall Opt		(70)
			Freq Lockouts
	Program System
			Broadcast Screen		(71)
	Srch/CloCall Opt		CTCSS/DCS Search		(16)
	Search for ...
			Max Auto Store		(72)
			Set Delay Time		(74)
			Set Modulation		(55) (72)
			Set Attenuator		(73)
			Set Data Skip		(73)
			Set Step		(74)
			Air Band Step		(75)
	--M E N U --		Search for ...			(59)
			Service Search
	Program System
			Edit Service			(62)
	Srch/CloCall Opt
			Custom Search			(60)
	Search for ...		Edit Custom			(61)
			Search and Store			(63)

36