Uniden UBC3500XLT owner manual Setting the Delay Time, Setting the Search Frequency Step

UB347ZH.fm Page 74 Thursday, August 31, 2006 11:57 AM

Off - the scanner remains on the channel until the transmission stops.

Notes:

•If you are trying to test the Close Call feature with a nearby transmitter and you do not talk into the transmitter, the scanner will detect this as data and will skip the frequency when Data Skip is on. Turn the feature off or talk into the transmitter.

•This setting is ignored for AM/WFM/FMB channels.

•The default setting for this feature is Off.

Setting the Delay Time

Menu

Srch/CloCall Opt

Set Delay Time

This setting determines how long the scanner waits after a transmission ends before resuming quick search or Close Call operation. Select your setting, then press the scroll control.

Off The scanner resumes immediately when the transmission ends.

1-5 sec The scanner waits the set amount of time after the transmission ends before resuming.

Note: The default setting is 2 sec.

Setting the Search Frequency Step

Menu

Srch/CloCall Opt

Set Step

This setting selects the frequency step used for setting the channels. Select your setting, then press the scroll control.

Auto The step is based on the band (see the table at the front of the manual)

74