UB347ZH.fm Page 63 Thursday, August 31, 2006 11:57 AM
Off The attenuator is off.
On Reception is attenuated by about 25 dB.
Notes:
•Turn on this setting if you are near other strong signal sources. Attenuation sometimes helps to reduce interference and desensitization that strong signals create.
•Search with Scan - sets whether the scanner includes the service search during scanning.
If unlocked, the scanner first scans all selected systems, then searches the air service searches for the selected hold time
Notes:
•You can also lock and unlock a search range by pressing Func , selecting the search range then pressing Func + L/O.
•If you select 0, the scanner searches the entire range one time.
•The default setting is 2 seconds for each search range.
•The scanner moves to the next system or search range after the hold time expires, any current transmission ends, and the channel delay time expires.
Auto Search and Store
Your scanner’s Auto Store feature lets you search for new frequencies in custom search ranges or within a service search range and stores the frequency into a conventional system automatically.
Selecting a System
To store frequencies which is found during Auto Store, you must first select a system where the frequencies will be stored.
Searching and Storing
63
