Uniden UBC3500XLT owner manual Setting the Channel Delay Time, Setting the Data Skip

UB347ZH.fm Page 48 Thursday, August 31, 2006 11:57 AM

Notes:

•If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity).

•The default setting is 2 seconds for each system.

•For conventional systems, all unlocked channels will be scanned at least once regardless of this setting.

•The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires.

Setting the Channel Delay Time

Menu

Program System

Select the system

Edit Sys Option

Set Delay Time

This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from 1-5or Off, then press E or the scroll control.

Notes:

•The default setting is 2 seconds for each system.

•This setting applies to all channels within the system.

Setting the Data Skip

Menu

Program System

Select the system

Edit Sys Option

Set Data Skip

This setting controls how the scanner behaves when it stops on a channel that has a data signal.

48